NVMEM discharge FET off?

classic Classic list List threaded Threaded
8 messages Options
Reply | Threaded
Open this post in threaded view
|

NVMEM discharge FET off?

Alexander Griesser-2

Hi,

 

anyone ever had these?

 

 

2/25/2017 19:39:32  san01n01         EMERGENCY     nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes.

2/25/2017 17:43:26  san01n02         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

2/25/2017 17:32:26  san01n02         ALERT         nvmem.battery.FET.off: The NVMEM battery charge FET is off. To prevent data loss, the system will shut down in 24 hours.

2/25/2017 17:29:27  san01n01         EMERGENCY     nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes.

2/25/2017 16:20:52  san01n01         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

 

The system did not shut down and all `system health` related commands I’m aware of tell me, that everything is good.

This is a brand new AFF A300, but it’s been running since about a month now, so it’s not been powered on today or anything like that which would rectify these messages sometimes.

 

Best,

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 


_______________________________________________
Toasters mailing list
[hidden email]
http://www.teaparty.net/mailman/listinfo/toasters
Reply | Threaded
Open this post in threaded view
|

AW: NVMEM discharge FET off?

Alexander Griesser-2

Hi,

 

I couldn’t find entries with „NVMEM“ in the name, but here’s everything that has „BAT“ in its name – is that what we’re looking for?

 

san01::> system node environment sensors show  -name Bat*

Node Sensor                 State Value/Units Crit-Low Warn-Low Warn-Hi Crit-Hi

---- --------------------- ------ ----------- -------- -------- ------- -------

san01n01

     Bat Present           normal

                                      PRESENT

     Bat Temp              normal

                                       24 C          0        5      53      58

     Bat Volt              normal

                                     8100 mV      5500     5600    8500    8600

     Bat Curr              normal

                                        0 mA         -        -    2320    2600

     Bat Rem Cap           normal

                                     3328 mA*hr      -        -       -       -

     Bat Full Cap          normal

                                     3328 mA*hr      -        -       -       -

     Bat Charge Curr       normal

                                        0 mA         -        -    2200    2300

     Bat Charge Volt       normal

                                     8200 mV         -        -    8900    9000

     Bat Initial FCC       normal

                                     3200 mA*hr      -        -       -       -

     Bat Dstg Cycles       normal

                                       21 cycles     2        5       -       -

     Bat Power Fault       normal

                                         GOOD

     Bat Dcharge FET       normal

                                           ON

     Bat Charge FET        normal

                                           ON

     Bat Cycle Count       normal

                                        4 cycles     -        -       -       -

san01n02

     Bat Present           normal

                                      PRESENT

     Bat Temp              normal

                                       24 C          0        5      53      58

     Bat Volt              normal

                                     8100 mV      5500     5600    8500    8600

     Bat Curr              normal

                                        0 mA         -        -    2320    2600

     Bat Rem Cap           normal

                                     3328 mA*hr      -        -       -       -

     Bat Full Cap          normal

                                     3328 mA*hr      -        -       -       -

     Bat Charge Curr       normal

                                        0 mA         -        -    2200    2300

     Bat Charge Volt       normal

                                     8200 mV         -        -    8900    9000

     Bat Initial FCC       normal

                                     3200 mA*hr      -        -       -       -

     Bat Dstg Cycles       normal

                                       21 cycles     2        5       -       -

     Bat Power Fault       normal

                                         GOOD

     Bat Dcharge FET       normal

                                           ON

     Bat Charge FET        normal

                                           ON

     Bat Cycle Count       normal

                                        3 cycles     -        -       -       -

28 entries were displayed.

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

Von: Mark Flint [mailto:[hidden email]]
Gesendet: Donnerstag, 2. März 2017 12:16
An: Alexander Griesser <[hidden email]>
Betreff: Re: NVMEM discharge FET off?

 

Take a look at the output from system sensors, should show you the battery, whether it’s charging or not,

And at what voltage

 

System node environment sensors show

 

And look for the nvmem battery info

 

 

`Mark

 

 

From: <[hidden email]> on behalf of Alexander Griesser <[hidden email]>
Date: Saturday, 25 February 2017 at 20:42
To: "[hidden email]" <[hidden email]>
Subject: NVMEM discharge FET off?

 

Hi,

 

anyone ever had these?

 

 

2/25/2017 19:39:32  san01n01         EMERGENCY     nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes.

2/25/2017 17:43:26  san01n02         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

2/25/2017 17:32:26  san01n02         ALERT         nvmem.battery.FET.off: The NVMEM battery charge FET is off. To prevent data loss, the system will shut down in 24 hours.

2/25/2017 17:29:27  san01n01         EMERGENCY     nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes.

2/25/2017 16:20:52  san01n01         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

 

The system did not shut down and all `system health` related commands I’m aware of tell me, that everything is good.

This is a brand new AFF A300, but it’s been running since about a month now, so it’s not been powered on today or anything like that which would rectify these messages sometimes.

 

Best,

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

-- The Wellcome Trust Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.


_______________________________________________
Toasters mailing list
[hidden email]
http://www.teaparty.net/mailman/listinfo/toasters
Reply | Threaded
Open this post in threaded view
|

RE: NVMEM discharge FET off?

Weber, Mark A

Check the event log in diag mode – I just had one but it cleared itself 10 seconds later:

****1::*> event log show -message-name nvmem.battery.discFET*

Time                Node             Severity      Event

------------------- ---------------- ------------- ---------------------------

3/2/2017 10:07:02   ****1-03         NOTICE        nvmem.battery.discFET.normal: The NVMEM battery discharge FET is on.

3/2/2017 10:06:52   ****1-03         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

2 entries were displayed.

 

But the normal message doesn’t show unless you are in advanced/diag

 

m

 

From: [hidden email] [mailto:[hidden email]] On Behalf Of Alexander Griesser
Sent: Thursday, March 2, 2017 5:49 AM
To: Mark Flint <[hidden email]>
Cc: [hidden email]
Subject: AW: NVMEM discharge FET off?

 

Hi,

 

I couldn’t find entries with „NVMEM“ in the name, but here’s everything that has „BAT“ in its name – is that what we’re looking for?

 

san01::> system node environment sensors show  -name Bat*

Node Sensor                 State Value/Units Crit-Low Warn-Low Warn-Hi Crit-Hi

---- --------------------- ------ ----------- -------- -------- ------- -------

san01n01

     Bat Present           normal

                                      PRESENT

     Bat Temp              normal

                                       24 C          0        5      53      58

     Bat Volt              normal

                                     8100 mV      5500     5600    8500    8600

     Bat Curr              normal

                                        0 mA         -        -    2320    2600

     Bat Rem Cap           normal

                                     3328 mA*hr      -        -       -       -

     Bat Full Cap          normal

                                     3328 mA*hr      -        -       -       -

     Bat Charge Curr       normal

                                        0 mA         -        -    2200    2300

     Bat Charge Volt       normal

                                     8200 mV         -        -    8900    9000

     Bat Initial FCC       normal

                                     3200 mA*hr      -        -       -       -

     Bat Dstg Cycles       normal

                                       21 cycles     2        5       -       -

     Bat Power Fault       normal

                                         GOOD

     Bat Dcharge FET       normal

                                           ON

     Bat Charge FET        normal

                                           ON

     Bat Cycle Count       normal

                                        4 cycles     -        -       -       -

san01n02

     Bat Present           normal

                                      PRESENT

     Bat Temp              normal

                                       24 C          0        5      53      58

     Bat Volt              normal

                                     8100 mV      5500     5600    8500    8600

     Bat Curr              normal

                                        0 mA         -        -    2320    2600

     Bat Rem Cap           normal

                                     3328 mA*hr      -        -       -       -

     Bat Full Cap          normal

                                     3328 mA*hr      -        -       -       -

     Bat Charge Curr       normal

                                        0 mA         -        -    2200    2300

     Bat Charge Volt       normal

                                     8200 mV         -        -    8900    9000

     Bat Initial FCC       normal

                                     3200 mA*hr      -        -       -       -

     Bat Dstg Cycles       normal

                                       21 cycles     2        5       -       -

     Bat Power Fault       normal

                                         GOOD

     Bat Dcharge FET       normal

                                           ON

     Bat Charge FET        normal

                                           ON

     Bat Cycle Count       normal

                                        3 cycles     -        -       -       -

28 entries were displayed.

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

Von: Mark Flint [[hidden email]]
Gesendet: Donnerstag, 2. März 2017 12:16
An: Alexander Griesser <[hidden email]>
Betreff: Re: NVMEM discharge FET off?

 

Take a look at the output from system sensors, should show you the battery, whether it’s charging or not,

And at what voltage

 

System node environment sensors show

 

And look for the nvmem battery info

 

 

`Mark

 

 

From: <[hidden email]> on behalf of Alexander Griesser <[hidden email]>
Date: Saturday, 25 February 2017 at 20:42
To: "[hidden email]" <[hidden email]>
Subject: NVMEM discharge FET off?

 

Hi,

 

anyone ever had these?

 

 

2/25/2017 19:39:32  san01n01         EMERGENCY     nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes.

2/25/2017 17:43:26  san01n02         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

2/25/2017 17:32:26  san01n02         ALERT         nvmem.battery.FET.off: The NVMEM battery charge FET is off. To prevent data loss, the system will shut down in 24 hours.

2/25/2017 17:29:27  san01n01         EMERGENCY     nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes.

2/25/2017 16:20:52  san01n01         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

 

The system did not shut down and all `system health` related commands I’m aware of tell me, that everything is good.

This is a brand new AFF A300, but it’s been running since about a month now, so it’s not been powered on today or anything like that which would rectify these messages sometimes.

 

Best,

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

-- The Wellcome Trust Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.


_______________________________________________
Toasters mailing list
[hidden email]
http://www.teaparty.net/mailman/listinfo/toasters
Reply | Threaded
Open this post in threaded view
|

AW: NVMEM discharge FET off?

Alexander Griesser-2
In reply to this post by Alexander Griesser-2

Hi Mark,

 

that’s unfortunately also not returning anything:

 

san01::> system node environment sensors show -name NV*

There are no entries matching your query.

 

san01::> set diag

 

Warning: These diagnostic commands are for use by NetApp personnel only.

Do you want to continue? {y|n}: y

 

san01::*> system node environment sensors show -name NV*

There are no entries matching your query.

 

Best,

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

Von: Mark Flint [mailto:[hidden email]]
Gesendet: Freitag, 3. März 2017 11:27
An: Alexander Griesser <[hidden email]>
Betreff: Re: NVMEM discharge FET off?

 

Apologies, it’s NVRAM, about 6 or so pages down the list……

System node environment sensors show –name NV*         works fine.

cluster1::> system node environment sensors show -name NV*   

Node Sensor                 State Value/Units Crit-Low Warn-Low Warn-Hi Crit-Hi

---- --------------------- ------ ----------- -------- -------- ------- -------

cluster1-01

     NVRAM Discharge FET   normal

                                           ON

     NVRAM Charge FET      normal

                                           ON

     NVRAM Batt Pct Capacity 

                           normal

                                       78 %         49       52       -       -

     NVRAM Batt Fault      normal

                                         GOOD

     NVRAM Power Fault     normal

                                         GOOD

     NVRAM Batt Design Cap. 

                           normal

                                     2500 mAh        -        -       -       -

     NVRAM Batt Cycle Count 

                           normal

                                       46            -        -       -     251

     NVRAM Batt Full Capacity 

                           normal

                                     1966 mAh        -        -       -       -

     NVRAM Batt Rem. Capacity 

                           normal

                                      503 mAh      279      299       -       -

     NVRAM Batt Current    normal

                                        0 mA      -901       -1    1201    1501

     NVRAM Batt Voltage    normal

Press <space> to page down, <return> for next line, or 'q' to quit... q

11 entries were displayed.

 

 

`Mark

 

From: Alexander Griesser <[hidden email]>
Date: Thursday, 2 March 2017 at 11:49
To: Mark Flint <[hidden email]>
Cc: "[hidden email]" <[hidden email]>
Subject: AW: NVMEM discharge FET off?

 

Hi,

 

I couldn’t find entries with „NVMEM“ in the name, but here’s everything that has „BAT“ in its name – is that what we’re looking for?

 

san01::> system node environment sensors show  -name Bat*

Node Sensor                 State Value/Units Crit-Low Warn-Low Warn-Hi Crit-Hi

---- --------------------- ------ ----------- -------- -------- ------- -------

san01n01

     Bat Present           normal

                                      PRESENT

     Bat Temp              normal

                                       24 C          0        5      53      58

     Bat Volt              normal

                                     8100 mV      5500     5600    8500    8600

     Bat Curr              normal

                                        0 mA         -        -    2320    2600

     Bat Rem Cap           normal

                                     3328 mA*hr      -        -       -       -

     Bat Full Cap          normal

                                     3328 mA*hr      -        -       -       -

     Bat Charge Curr       normal

                                        0 mA         -        -    2200    2300

     Bat Charge Volt       normal

                                     8200 mV         -        -    8900    9000

     Bat Initial FCC       normal

                                     3200 mA*hr      -        -       -       -

     Bat Dstg Cycles       normal

                                       21 cycles     2        5       -       -

     Bat Power Fault       normal

                                         GOOD

     Bat Dcharge FET       normal

                                           ON

     Bat Charge FET        normal

                                           ON

     Bat Cycle Count       normal

                                        4 cycles     -        -       -       -

san01n02

     Bat Present           normal

                                      PRESENT

     Bat Temp              normal

                                       24 C          0        5      53      58

     Bat Volt              normal

                                     8100 mV      5500     5600    8500    8600

     Bat Curr              normal

                                        0 mA         -        -    2320    2600

     Bat Rem Cap           normal

                                     3328 mA*hr      -        -       -       -

     Bat Full Cap          normal

                                     3328 mA*hr      -        -       -       -

     Bat Charge Curr       normal

                                        0 mA         -        -    2200    2300

     Bat Charge Volt       normal

                                     8200 mV         -        -    8900    9000

     Bat Initial FCC       normal

                                     3200 mA*hr      -        -       -       -

     Bat Dstg Cycles       normal

                                       21 cycles     2        5       -       -

     Bat Power Fault       normal

                                         GOOD

     Bat Dcharge FET       normal

                                           ON

     Bat Charge FET        normal

                                           ON

     Bat Cycle Count       normal

                                        3 cycles     -        -       -       -

28 entries were displayed.

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

Von: Mark Flint [[hidden email]]
Gesendet: Donnerstag, 2. März 2017 12:16

An: Alexander Griesser <[hidden email]>
Betreff: Re: NVMEM discharge FET off?

 

Take a look at the output from system sensors, should show you the battery, whether it’s charging or not,

And at what voltage

 

System node environment sensors show

 

And look for the nvmem battery info

 

 

`Mark

 

 

From: <[hidden email]> on behalf of Alexander Griesser <[hidden email]>
Date: Saturday, 25 February 2017 at 20:42
To: "[hidden email]" <[hidden email]>
Subject: NVMEM discharge FET off?

 

Hi,

 

anyone ever had these?

 

 

2/25/2017 19:39:32  san01n01         EMERGENCY     nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes.

2/25/2017 17:43:26  san01n02         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

2/25/2017 17:32:26  san01n02         ALERT         nvmem.battery.FET.off: The NVMEM battery charge FET is off. To prevent data loss, the system will shut down in 24 hours.

2/25/2017 17:29:27  san01n01         EMERGENCY     nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes.

2/25/2017 16:20:52  san01n01         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

 

The system did not shut down and all `system health` related commands I’m aware of tell me, that everything is good.

This is a brand new AFF A300, but it’s been running since about a month now, so it’s not been powered on today or anything like that which would rectify these messages sometimes.

 

Best,

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

-- The Wellcome Trust Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.

-- The Wellcome Trust Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.


_______________________________________________
Toasters mailing list
[hidden email]
http://www.teaparty.net/mailman/listinfo/toasters
Reply | Threaded
Open this post in threaded view
|

AW: NVMEM discharge FET off?

Alexander Griesser-2
In reply to this post by Weber, Mark A

Also nothing :-/

 

san01::*> event log show -message-name nvmem.battery.discFET*

There are no entries matching your query.

 

san01::*>

 

But it didn’t happen again since then, so I’m not sure if this was just a hickup or an issue that will get bigger in the future…

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

Von: Weber, Mark A [mailto:[hidden email]]
Gesendet: Donnerstag, 2. März 2017 17:26
An: Alexander Griesser <[hidden email]>
Cc: [hidden email]
Betreff: RE: NVMEM discharge FET off?

 

Check the event log in diag mode – I just had one but it cleared itself 10 seconds later:

****1::*> event log show -message-name nvmem.battery.discFET*

Time                Node             Severity      Event

------------------- ---------------- ------------- ---------------------------

3/2/2017 10:07:02   ****1-03         NOTICE        nvmem.battery.discFET.normal: The NVMEM battery discharge FET is on.

3/2/2017 10:06:52   ****1-03         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

2 entries were displayed.

 

But the normal message doesn’t show unless you are in advanced/diag

 

m

 

From: [hidden email] [[hidden email]] On Behalf Of Alexander Griesser
Sent: Thursday, March 2, 2017 5:49 AM
To: Mark Flint <
[hidden email]>
Cc:
[hidden email]
Subject: AW: NVMEM discharge FET off?

 

Hi,

 

I couldn’t find entries with „NVMEM“ in the name, but here’s everything that has „BAT“ in its name – is that what we’re looking for?

 

san01::> system node environment sensors show  -name Bat*

Node Sensor                 State Value/Units Crit-Low Warn-Low Warn-Hi Crit-Hi

---- --------------------- ------ ----------- -------- -------- ------- -------

san01n01

     Bat Present           normal

                                      PRESENT

     Bat Temp              normal

                                       24 C          0        5      53      58

     Bat Volt              normal

                                     8100 mV      5500     5600    8500    8600

     Bat Curr              normal

                                        0 mA         -        -    2320    2600

     Bat Rem Cap           normal

                                     3328 mA*hr      -        -       -       -

     Bat Full Cap          normal

                                     3328 mA*hr      -        -       -       -

     Bat Charge Curr       normal

                                        0 mA         -        -    2200    2300

     Bat Charge Volt       normal

                                     8200 mV         -        -    8900    9000

     Bat Initial FCC       normal

                                     3200 mA*hr      -        -       -       -

     Bat Dstg Cycles       normal

                                       21 cycles     2        5       -       -

     Bat Power Fault       normal

                                         GOOD

     Bat Dcharge FET       normal

                                           ON

     Bat Charge FET        normal

                                           ON

     Bat Cycle Count       normal

                                        4 cycles     -        -       -       -

san01n02

     Bat Present           normal

                                      PRESENT

     Bat Temp              normal

                                       24 C          0        5      53      58

     Bat Volt              normal

                                     8100 mV      5500     5600    8500    8600

     Bat Curr              normal

                                        0 mA         -        -    2320    2600

     Bat Rem Cap           normal

                                     3328 mA*hr      -        -       -       -

     Bat Full Cap          normal

                                     3328 mA*hr      -        -       -       -

     Bat Charge Curr       normal

                                        0 mA         -        -    2200    2300

     Bat Charge Volt       normal

                                     8200 mV         -        -    8900    9000

     Bat Initial FCC       normal

                                     3200 mA*hr      -        -       -       -

     Bat Dstg Cycles       normal

                                       21 cycles     2        5       -       -

     Bat Power Fault       normal

                                         GOOD

     Bat Dcharge FET       normal

                                           ON

     Bat Charge FET        normal

                                           ON

     Bat Cycle Count       normal

                                        3 cycles     -        -       -       -

28 entries were displayed.

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

Von: Mark Flint [[hidden email]]
Gesendet: Donnerstag, 2. März 2017 12:16
An: Alexander Griesser <
[hidden email]>
Betreff: Re: NVMEM discharge FET off?

 

Take a look at the output from system sensors, should show you the battery, whether it’s charging or not,

And at what voltage

 

System node environment sensors show

 

And look for the nvmem battery info

 

 

`Mark

 

 

From: <[hidden email]> on behalf of Alexander Griesser <[hidden email]>
Date: Saturday, 25 February 2017 at 20:42
To: "
[hidden email]" <[hidden email]>
Subject: NVMEM discharge FET off?

 

Hi,

 

anyone ever had these?

 

 

2/25/2017 19:39:32  san01n01         EMERGENCY     nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes.

2/25/2017 17:43:26  san01n02         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

2/25/2017 17:32:26  san01n02         ALERT         nvmem.battery.FET.off: The NVMEM battery charge FET is off. To prevent data loss, the system will shut down in 24 hours.

2/25/2017 17:29:27  san01n01         EMERGENCY     nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes.

2/25/2017 16:20:52  san01n01         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

 

The system did not shut down and all `system health` related commands I’m aware of tell me, that everything is good.

This is a brand new AFF A300, but it’s been running since about a month now, so it’s not been powered on today or anything like that which would rectify these messages sometimes.

 

Best,

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

-- The Wellcome Trust Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.


_______________________________________________
Toasters mailing list
[hidden email]
http://www.teaparty.net/mailman/listinfo/toasters
Reply | Threaded
Open this post in threaded view
|

RE: NVMEM discharge FET off?

Duncan Cummings

There is a BURT for this one.

 

http://mysupport.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=1063994

 

It looks like an SP firmware bug and should be fixed in the next SP firmware release.

 

 

 


Duncan Cummings
NetApp Specialist
Interactive Pty Ltd
Telephone +61 7 3323 0800
Facsimile +61 7 3323 0899
Mobile +61 403 383 050
www.interactive.com.au

-------Confidentiality & Legal Privilege-------------
"This email is intended for the named recipient only. The information contained in this message may be confidential, or commercially sensitive. If you are not the intended recipient you must not reproduce or distribute any part of the email, disclose its contents to any other party, or take any action in reliance on it. If you have received this email in error, please contact the sender immediately. Please delete this message from your computer. Confidentiality and legal privilege are not waived or lost by reason of mistaken delivery to you."

From: [hidden email] [mailto:[hidden email]] On Behalf Of Alexander Griesser
Sent: Saturday, 11 March 2017 9:51 AM
To: Weber, Mark A <[hidden email]>
Cc: [hidden email]
Subject: AW: NVMEM discharge FET off?

 

Also nothing :-/

 

san01::*> event log show -message-name nvmem.battery.discFET*

There are no entries matching your query.

 

san01::*>

 

But it didn’t happen again since then, so I’m not sure if this was just a hickup or an issue that will get bigger in the future…

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

Von: Weber, Mark A [[hidden email]]
Gesendet: Donnerstag, 2. März 2017 17:26
An: Alexander Griesser <
[hidden email]>
Cc:
[hidden email]
Betreff: RE: NVMEM discharge FET off?

 

Check the event log in diag mode – I just had one but it cleared itself 10 seconds later:

****1::*> event log show -message-name nvmem.battery.discFET*

Time                Node             Severity      Event

------------------- ---------------- ------------- ---------------------------

3/2/2017 10:07:02   ****1-03         NOTICE        nvmem.battery.discFET.normal: The NVMEM battery discharge FET is on.

3/2/2017 10:06:52   ****1-03         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

2 entries were displayed.

 

But the normal message doesn’t show unless you are in advanced/diag

 

m

 

From: [hidden email] [[hidden email]] On Behalf Of Alexander Griesser
Sent: Thursday, March 2, 2017 5:49 AM
To: Mark Flint <
[hidden email]>
Cc:
[hidden email]
Subject: AW: NVMEM discharge FET off?

 

Hi,

 

I couldn’t find entries with „NVMEM“ in the name, but here’s everything that has „BAT“ in its name – is that what we’re looking for?

 

san01::> system node environment sensors show  -name Bat*

Node Sensor                 State Value/Units Crit-Low Warn-Low Warn-Hi Crit-Hi

---- --------------------- ------ ----------- -------- -------- ------- -------

san01n01

     Bat Present           normal

                                      PRESENT

     Bat Temp              normal

                                       24 C          0        5      53      58

     Bat Volt              normal

                                     8100 mV      5500     5600    8500    8600

     Bat Curr              normal

                                        0 mA         -        -    2320    2600

     Bat Rem Cap           normal

                                     3328 mA*hr      -        -       -       -

     Bat Full Cap          normal

                                     3328 mA*hr      -        -       -       -

     Bat Charge Curr       normal

                                        0 mA         -        -    2200    2300

     Bat Charge Volt       normal

                                     8200 mV         -        -    8900    9000

     Bat Initial FCC       normal

                                     3200 mA*hr      -        -       -       -

     Bat Dstg Cycles       normal

                                       21 cycles     2        5       -       -

     Bat Power Fault       normal

                                         GOOD

     Bat Dcharge FET       normal

                                           ON

     Bat Charge FET        normal

                                           ON

     Bat Cycle Count       normal

                                        4 cycles     -        -       -       -

san01n02

     Bat Present           normal

                                      PRESENT

     Bat Temp              normal

                                       24 C          0        5      53      58

     Bat Volt              normal

                                     8100 mV      5500     5600    8500    8600

     Bat Curr              normal

                                        0 mA         -        -    2320    2600

     Bat Rem Cap           normal

                                     3328 mA*hr      -        -       -       -

     Bat Full Cap          normal

                                     3328 mA*hr      -        -       -       -

     Bat Charge Curr       normal

                                        0 mA         -        -    2200    2300

     Bat Charge Volt       normal

                                     8200 mV         -        -    8900    9000

     Bat Initial FCC       normal

                                     3200 mA*hr      -        -       -       -

     Bat Dstg Cycles       normal

                                       21 cycles     2        5       -       -

     Bat Power Fault       normal

                                         GOOD

     Bat Dcharge FET       normal

                                           ON

     Bat Charge FET        normal

                                           ON

     Bat Cycle Count       normal

                                        3 cycles     -        -       -       -

28 entries were displayed.

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

Von: Mark Flint [[hidden email]]
Gesendet: Donnerstag, 2. März 2017 12:16
An: Alexander Griesser <
[hidden email]>
Betreff: Re: NVMEM discharge FET off?

 

Take a look at the output from system sensors, should show you the battery, whether it’s charging or not,

And at what voltage

 

System node environment sensors show

 

And look for the nvmem battery info

 

 

`Mark

 

 

From: <[hidden email]> on behalf of Alexander Griesser <[hidden email]>
Date: Saturday, 25 February 2017 at 20:42
To: "
[hidden email]" <[hidden email]>
Subject: NVMEM discharge FET off?

 

Hi,

 

anyone ever had these?

 

 

2/25/2017 19:39:32  san01n01         EMERGENCY     nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes.

2/25/2017 17:43:26  san01n02         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

2/25/2017 17:32:26  san01n02         ALERT         nvmem.battery.FET.off: The NVMEM battery charge FET is off. To prevent data loss, the system will shut down in 24 hours.

2/25/2017 17:29:27  san01n01         EMERGENCY     nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes.

2/25/2017 16:20:52  san01n01         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

 

The system did not shut down and all `system health` related commands I’m aware of tell me, that everything is good.

This is a brand new AFF A300, but it’s been running since about a month now, so it’s not been powered on today or anything like that which would rectify these messages sometimes.

 

Best,

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

-- The Wellcome Trust Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.

 

Click here to report this email as spam.


_______________________________________________
Toasters mailing list
[hidden email]
http://www.teaparty.net/mailman/listinfo/toasters
Reply | Threaded
Open this post in threaded view
|

AW: NVMEM discharge FET off?

Alexander Griesser-2

Great, thanks – Watching this BURT now to see when the fix arrives.

 

Best,

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

Von: Duncan Cummings [mailto:[hidden email]]
Gesendet: Montag, 13. März 2017 01:35
An: Alexander Griesser <[hidden email]>; Weber, Mark A <[hidden email]>
Cc: [hidden email]
Betreff: RE: NVMEM discharge FET off?

 

There is a BURT for this one.

 

http://mysupport.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=1063994

 

It looks like an SP firmware bug and should be fixed in the next SP firmware release.

 

 

 


Duncan Cummings
NetApp Specialist
Interactive Pty Ltd
Telephone +61 7 3323 0800
Facsimile +61 7 3323 0899
Mobile +61 403 383 050
www.interactive.com.au

-------Confidentiality & Legal Privilege-------------
"This email is intended for the named recipient only. The information contained in this message may be confidential, or commercially sensitive. If you are not the intended recipient you must not reproduce or distribute any part of the email, disclose its contents to any other party, or take any action in reliance on it. If you have received this email in error, please contact the sender immediately. Please delete this message from your computer. Confidentiality and legal privilege are not waived or lost by reason of mistaken delivery to you."

From: [hidden email] [[hidden email]] On Behalf Of Alexander Griesser
Sent: Saturday, 11 March 2017 9:51 AM
To: Weber, Mark A <[hidden email]>
Cc: [hidden email]
Subject: AW: NVMEM discharge FET off?

 

Also nothing :-/

 

san01::*> event log show -message-name nvmem.battery.discFET*

There are no entries matching your query.

 

san01::*>

 

But it didn’t happen again since then, so I’m not sure if this was just a hickup or an issue that will get bigger in the future…

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

Von: Weber, Mark A [[hidden email]]
Gesendet: Donnerstag, 2. März 2017 17:26
An: Alexander Griesser <[hidden email]>
Cc: [hidden email]
Betreff: RE: NVMEM discharge FET off?

 

Check the event log in diag mode – I just had one but it cleared itself 10 seconds later:

****1::*> event log show -message-name nvmem.battery.discFET*

Time                Node             Severity      Event

------------------- ---------------- ------------- ---------------------------

3/2/2017 10:07:02   ****1-03         NOTICE        nvmem.battery.discFET.normal: The NVMEM battery discharge FET is on.

3/2/2017 10:06:52   ****1-03         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

2 entries were displayed.

 

But the normal message doesn’t show unless you are in advanced/diag

 

m

 

From: [hidden email] [[hidden email]] On Behalf Of Alexander Griesser
Sent: Thursday, March 2, 2017 5:49 AM
To: Mark Flint <
[hidden email]>
Cc:
[hidden email]
Subject: AW: NVMEM discharge FET off?

 

Hi,

 

I couldn’t find entries with „NVMEM“ in the name, but here’s everything that has „BAT“ in its name – is that what we’re looking for?

 

san01::> system node environment sensors show  -name Bat*

Node Sensor                 State Value/Units Crit-Low Warn-Low Warn-Hi Crit-Hi

---- --------------------- ------ ----------- -------- -------- ------- -------

san01n01

     Bat Present           normal

                                      PRESENT

     Bat Temp              normal

                                       24 C          0        5      53      58

     Bat Volt              normal

                                     8100 mV      5500     5600    8500    8600

     Bat Curr              normal

                                        0 mA         -        -    2320    2600

     Bat Rem Cap           normal

                                     3328 mA*hr      -        -       -       -

     Bat Full Cap          normal

                                     3328 mA*hr      -        -       -       -

     Bat Charge Curr       normal

                                        0 mA         -        -    2200    2300

     Bat Charge Volt       normal

                                     8200 mV         -        -    8900    9000

     Bat Initial FCC       normal

                                     3200 mA*hr      -        -       -       -

     Bat Dstg Cycles       normal

                                       21 cycles     2        5       -       -

     Bat Power Fault       normal

                                         GOOD

     Bat Dcharge FET       normal

                                           ON

     Bat Charge FET        normal

                                           ON

     Bat Cycle Count       normal

                                        4 cycles     -        -       -       -

san01n02

     Bat Present           normal

                                      PRESENT

     Bat Temp              normal

                                       24 C          0        5      53      58

     Bat Volt              normal

                                     8100 mV      5500     5600    8500    8600

     Bat Curr              normal

                                        0 mA         -        -    2320    2600

     Bat Rem Cap           normal

                                     3328 mA*hr      -        -       -       -

     Bat Full Cap          normal

                                     3328 mA*hr      -        -       -       -

     Bat Charge Curr       normal

                                        0 mA         -        -    2200    2300

     Bat Charge Volt       normal

                                     8200 mV         -        -    8900    9000

     Bat Initial FCC       normal

                                     3200 mA*hr      -        -       -       -

     Bat Dstg Cycles       normal

                                       21 cycles     2        5       -       -

     Bat Power Fault       normal

                                         GOOD

     Bat Dcharge FET       normal

                                           ON

     Bat Charge FET        normal

                                           ON

     Bat Cycle Count       normal

                                        3 cycles     -        -       -       -

28 entries were displayed.

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

Von: Mark Flint [[hidden email]]
Gesendet: Donnerstag, 2. März 2017 12:16
An: Alexander Griesser <
[hidden email]>
Betreff: Re: NVMEM discharge FET off?

 

Take a look at the output from system sensors, should show you the battery, whether it’s charging or not,

And at what voltage

 

System node environment sensors show

 

And look for the nvmem battery info

 

 

`Mark

 

 

From: <[hidden email]> on behalf of Alexander Griesser <[hidden email]>
Date: Saturday, 25 February 2017 at 20:42
To: "
[hidden email]" <[hidden email]>
Subject: NVMEM discharge FET off?

 

Hi,

 

anyone ever had these?

 

 

2/25/2017 19:39:32  san01n01         EMERGENCY     nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes.

2/25/2017 17:43:26  san01n02         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

2/25/2017 17:32:26  san01n02         ALERT         nvmem.battery.FET.off: The NVMEM battery charge FET is off. To prevent data loss, the system will shut down in 24 hours.

2/25/2017 17:29:27  san01n01         EMERGENCY     nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes.

2/25/2017 16:20:52  san01n01         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

 

The system did not shut down and all `system health` related commands I’m aware of tell me, that everything is good.

This is a brand new AFF A300, but it’s been running since about a month now, so it’s not been powered on today or anything like that which would rectify these messages sometimes.

 

Best,

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

-- The Wellcome Trust Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.

 

Click here to report this email as spam.


_______________________________________________
Toasters mailing list
[hidden email]
http://www.teaparty.net/mailman/listinfo/toasters
Reply | Threaded
Open this post in threaded view
|

Re: NVMEM discharge FET off?

Mark Flint
In reply to this post by Alexander Griesser-2

Hmm, in the traditional way “it works on my netapp” J

 

Even if there’s no fault, that line *should* bring you back the info from the lines starting with NV.

See the output in the mail trail below, so if you’re not seeing those lines, then we have a mismatch somehow.

Seem your other mails, so I know it’s ;gone away’ for now, but still a little puzzled as to why you’re not seeing

Them at all.

 

`Mark

 

 

 

From: Alexander Griesser <[hidden email]>
Date: Friday, 10 March 2017 at 23:44
To: Mark Flint <[hidden email]>
Cc: "[hidden email]" <[hidden email]>
Subject: AW: NVMEM discharge FET off?

 

Hi Mark,

 

that’s unfortunately also not returning anything:

 

san01::> system node environment sensors show -name NV*

There are no entries matching your query.

 

san01::> set diag

 

Warning: These diagnostic commands are for use by NetApp personnel only.

Do you want to continue? {y|n}: y

 

san01::*> system node environment sensors show -name NV*

There are no entries matching your query.

 

Best,

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

Von: Mark Flint [mailto:[hidden email]]
Gesendet: Freitag, 3. März 2017 11:27

An: Alexander Griesser <[hidden email]>
Betreff: Re: NVMEM discharge FET off?

 

Apologies, it’s NVRAM, about 6 or so pages down the list……

System node environment sensors show –name NV*         works fine.

cluster1::> system node environment sensors show -name NV*   

Node Sensor                 State Value/Units Crit-Low Warn-Low Warn-Hi Crit-Hi

---- --------------------- ------ ----------- -------- -------- ------- -------

cluster1-01

     NVRAM Discharge FET   normal

                                           ON

     NVRAM Charge FET      normal

                                           ON

     NVRAM Batt Pct Capacity 

                           normal

                                       78 %         49       52       -       -

     NVRAM Batt Fault      normal

                                         GOOD

     NVRAM Power Fault     normal

                                         GOOD

     NVRAM Batt Design Cap. 

                           normal

                                     2500 mAh        -        -       -       -

     NVRAM Batt Cycle Count 

                           normal

                                       46            -        -       -     251

     NVRAM Batt Full Capacity 

                           normal

                                     1966 mAh        -        -       -       -

     NVRAM Batt Rem. Capacity 

                           normal

                                      503 mAh      279      299       -       -

     NVRAM Batt Current    normal

                                        0 mA      -901       -1    1201    1501

     NVRAM Batt Voltage    normal

Press <space> to page down, <return> for next line, or 'q' to quit... q

11 entries were displayed.

 

 

`Mark

 

From: Alexander Griesser <[hidden email]>
Date: Thursday, 2 March 2017 at 11:49
To: Mark Flint <[hidden email]>
Cc: "[hidden email]" <[hidden email]>
Subject: AW: NVMEM discharge FET off?

 

Hi,

 

I couldn’t find entries with „NVMEM“ in the name, but here’s everything that has „BAT“ in its name – is that what we’re looking for?

 

san01::> system node environment sensors show  -name Bat*

Node Sensor                 State Value/Units Crit-Low Warn-Low Warn-Hi Crit-Hi

---- --------------------- ------ ----------- -------- -------- ------- -------

san01n01

     Bat Present           normal

                                      PRESENT

     Bat Temp              normal

                                       24 C          0        5      53      58

     Bat Volt              normal

                                     8100 mV      5500     5600    8500    8600

     Bat Curr              normal

                                        0 mA         -        -    2320    2600

     Bat Rem Cap           normal

                                     3328 mA*hr      -        -       -       -

     Bat Full Cap          normal

                                     3328 mA*hr      -        -       -       -

     Bat Charge Curr       normal

                                        0 mA         -        -    2200    2300

     Bat Charge Volt       normal

                                     8200 mV         -        -    8900    9000

     Bat Initial FCC       normal

                                     3200 mA*hr      -        -       -       -

     Bat Dstg Cycles       normal

                                       21 cycles     2        5       -       -

     Bat Power Fault       normal

                                         GOOD

     Bat Dcharge FET       normal

                                           ON

     Bat Charge FET        normal

                                           ON

     Bat Cycle Count       normal

                                        4 cycles     -        -       -       -

san01n02

     Bat Present           normal

                                      PRESENT

     Bat Temp              normal

                                       24 C          0        5      53      58

     Bat Volt              normal

                                     8100 mV      5500     5600    8500    8600

     Bat Curr              normal

                                        0 mA         -        -    2320    2600

     Bat Rem Cap           normal

                                     3328 mA*hr      -        -       -       -

     Bat Full Cap          normal

                                     3328 mA*hr      -        -       -       -

     Bat Charge Curr       normal

                                        0 mA         -        -    2200    2300

     Bat Charge Volt       normal

                                     8200 mV         -        -    8900    9000

     Bat Initial FCC       normal

                                     3200 mA*hr      -        -       -       -

     Bat Dstg Cycles       normal

                                       21 cycles     2        5       -       -

     Bat Power Fault       normal

                                         GOOD

     Bat Dcharge FET       normal

                                           ON

     Bat Charge FET        normal

                                           ON

     Bat Cycle Count       normal

                                        3 cycles     -        -       -       -

28 entries were displayed.

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

Von: Mark Flint [[hidden email]]
Gesendet: Donnerstag, 2. März 2017 12:16

An: Alexander Griesser <[hidden email]>
Betreff: Re: NVMEM discharge FET off?

 

Take a look at the output from system sensors, should show you the battery, whether it’s charging or not,

And at what voltage

 

System node environment sensors show

 

And look for the nvmem battery info

 

 

`Mark

 

 

From: <[hidden email]> on behalf of Alexander Griesser <[hidden email]>
Date: Saturday, 25 February 2017 at 20:42
To: "[hidden email]" <[hidden email]>
Subject: NVMEM discharge FET off?

 

Hi,

 

anyone ever had these?

 

 

2/25/2017 19:39:32  san01n01         EMERGENCY     nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes.

2/25/2017 17:43:26  san01n02         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

2/25/2017 17:32:26  san01n02         ALERT         nvmem.battery.FET.off: The NVMEM battery charge FET is off. To prevent data loss, the system will shut down in 24 hours.

2/25/2017 17:29:27  san01n01         EMERGENCY     nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes.

2/25/2017 16:20:52  san01n01         EMERGENCY     nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.

 

The system did not shut down and all `system health` related commands I’m aware of tell me, that everything is good.

This is a brand new AFF A300, but it’s been running since about a month now, so it’s not been powered on today or anything like that which would rectify these messages sometimes.

 

Best,

 

Alexander Griesser

Head of Systems Operations

 

ANEXIA Internetdienstleistungs GmbH

 

E-Mail: [hidden email]

Web: http://www.anexia-it.com

 

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

 

-- The Wellcome Trust Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.

-- The Wellcome Trust Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.

-- The Wellcome Trust Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.
_______________________________________________
Toasters mailing list
[hidden email]
http://www.teaparty.net/mailman/listinfo/toasters